Operating Regulations Of Jacquard Machine

1. When repairing, you must first press the left and right red stop buttons, indicating that the jacquard machine is in the process of repairing.

2. It is strictly forbidden to cross the barrier, go up and down the stairs slowly and carefully, and beware of slips.

3. It is strictly forbidden to dismantle the pattern board across the bridge and the horizontal bar, hang the gantry on the ground and roll off, injuring the equipment and the car operator.

4. Do not place the tools at will to prevent accidents caused by dropping hands during operation.

5. When the safety baffle is moved due to maintenance needs, it should be restored in time after the maintenance is completed.

6. After starting the machine after maintenance, you should perform slow running for more than 2 latitudes first, and confirm that it is normal before fast running. Confirm that the quality of the fabric is normal and the equipment is running normally before leaving the maintenance machine.

Currently, the company's product range covers three major series of shedding devices for weaving machines (dobbies, jacquards, and cams), forming a series of products primarily focused on electronic shedding devices, supplemented by mechanical shedding devices.Leading products include: D2876, D2875, D2861, D2869B, CF2678, CF2655, GT405-II/-III, CF2635 medium and high-speed electronic dobbies; ASGT418 (GD50) mechanical dobbies; GT512L, GT512T, JL1620, JL2410 series electronic jacquards; GT623/GT623-II, S1351, S1352, S1353, S1354, S1356 cam shedding devices. These products can be matched with various imported and domestic mid-to-high-end air-jet, water-jet, and rapier looms, with some products approaching or reaching the advanced level of international counterparts. The annual production capacity is about 60,000 units.

As a professional manufacturer and supplier, we provide high-quality products. If you are interested in our products or have any questions, please feel free to contact us.